Product name

MODEL:SMA KWE connector

SMA KWE is a PCB RF connector designed specifically for the terminals of wireless communication systems. The connector is bent at 90 degrees, and the four corners can be soldered on the grounding surface of the PCB main board of the terminal. The PIN pin is soldered on the signal microstrip line, and the appearance is beautiful. It can be easily embedded in each wireless terminal housing according to the size of the terminal. .

Product name

SMA KWE PCB  connector

Product manual

 SMA KWE is a PCB RF connector designed specifically for the terminals of wireless communication systems. The connector is bent at 90 degrees, and the four corners can be soldered on the grounding surface of the PCB main board of the terminal. The PIN pin is soldered on the signal microstrip line, and the appearance is beautiful. It can be easily embedded in each wireless terminal housing according to the size of the terminal. .



Electrical parameter

Frequency Range-MHz

DC~6

Characteristic impedance-Ω

50

Operating Voltage-V

>200

Inner conductor contact resistance

<3mΩ

Outer conductor contact resistance

<2mΩ

Insulation resistance

>4000 MΩ

Insertion loss

<0.15dB/6GHz

Voltage motherboard ratio

<1.2



Mechanical parameters

Connector size-mm

L20×H14.5

Weight-g


Diameter-mm

-

Temperature(℃)

-35~80

Humidity

5~95﹪

材质

铜电镀硬金

其他

可依据客户需求定制




Relevant Recommend /
2018 - 10 - 26
The square box antenna (WWXL-P900/1800-3289) is suitable for sending and receiving signals with GSM/GPRS900/1800MHz mobile terminals and wireless power meter reading system; it is compact and light an...
2018 - 10 - 12
2.4G folding day (WWXL-2400-68) is specially designed and manufactured for 2.4GHz terminals. The antenna is small in size, fastened and installed with lead out cable. The performance is stable and rel...
2018 - 10 - 12
The terminal antenna (WWXL-W505N-66) is suitable for sending and receiving signals with 505MHz mobile terminal, handheld, and power meter reading system; it is compact, light and easy to install.
2018 - 10 - 12
The 2.4G elbow antenna (WWXL-W2400-04) antenna is specially designed for the terminal of the 2.4GHz WLAN system. The antenna has good standing wave ratio, small size, convenient installation, stable p...
Contact information   
Address: R & D Center: Room 1101, Building T4, Fangdacheng, No. 2, Longzhu 4th Road, Taoyuan Street, Nanshan District, Shenzhen.
Production base: Building 2-3, Northwest Hubei Renewable Resources Trading Center, Gucheng County Economic Development Zone, Xiangyang City, Hubei Province.
Call:13662684409
Fax:0710-6198999
Feedback    Leave a message
  • Name:
  • *
  • Call:
  • *
  • E-mail:
  • *
  • Content:
  • *
     
Copyright ©2018 - 2019 Shenzhen all things connected Communication Co., Ltd
犀牛云提供企业云服务